Fender Splash Shield

Fender Splash Shield

Removal and Installation

1. Remove the wheel and tire. For additional information, refer to Wheels and Tires Removal and Replacement.

2. Release the wire retainers from the fender splash shield.

3. Remove the 2 lower front splash shield bolts.
- To install, tighten to 9 Nm (80 lb-in).

4. Disconnect the rear pin-type retainer for the lower front fender bolt cover from the front fender splash shield.

5. Remove the front fender splash shield bolts from the wheel lip.

6. Remove the 3 inner fender splash shield bolts.
- To install, tighten to 9 Nm (80 lb-in).

7. For the LH side, partially lower the fender splash shield and disconnect the 2 air deflector pin-type retainers.

8. Remove the fender splash shield.

9. To install, reverse the removal procedure.