Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Controls Interface Module (FCIM)




Front Controls Interface Module (FCIM)

NOTE: Vehicle with navigation shown, others similar.











Removal

1. Remove the instrument panel center finish panel. For additional information, refer to Instrument Panel and Console Instrument Panel Finish Panel.

2. Remove the 17 screws (vehicles without navigation) or 8 screws (vehicles with navigation), and remove the Front Controls Interface Module (FCIM).

Installation

1. Align the FCIM to the instrument panel center finish panel so there is a consistent gap at the top of the FCIM.





2. NOTICE: Lightly hand-tighten the screws. Do not use power tools.

Install the 17 screws (vehicles without navigation) or 8 screws (vehicles with navigation).

- Adjust the FCIM, if necessary, by loosening the top screws, then re-tightening.

3. Install the instrument panel center finish panel. For additional information, refer to Instrument Panel and Console Instrument Panel Finish Panel.