Refrigerator

Refrigerator

Rear console









Removal and Installation

1. Remove the rear floor console. For additional information, refer to Console - Rear, Floor Console - Rear, Floor.

2. Remove the rear armrest.

3. Remove the rear finish panel.

4. Remove the refrigerator switch assembly.

5. Remove the 4 top trim panel screws.





6. Remove the side finish panel by sliding the panel towards the rear.

7. Separate the upper and lower console inner structure panels by removing the 6 screws on each side.





8. Remove the two torx screws from the lower rear of the refrigerator.





9. Remove the six torx screws from the refrigerator.





10. Remove the refrigerator.

11. To install, reverse the removal procedure.
- Transfer parts as needed.

- Make sure to align the trim panel retaining clips to the retaining clip holes in the rear floor console.