Oil Pump Screen and Pickup Tube

Oil Pump Screen and Pickup Tube





Removal

1. Remove the oil pan. For additional information, refer to Oil Pan Oil Pan.

2. Remove the 4 bolts and the oil pump screen and pickup tube.
- Discard the gasket.

Installation

1. NOTE: Clean the sealing surface with metal surface prep. Observe all warnings and cautions and follow all application directions contained on the packaging of the metal surface prep.

Position a new oil pump pickup tube gasket and the pickup tube, and tighten the 4 bolts in the sequence shown.

- Tighten to 10 Nm (89 lb-in).





2. Install the oil pan. For additional information, refer to Oil Pan Oil Pan.