Fan Shroud: Service and Repair

Cooling Fan Shroud - 4.0L





Removal and Installation

1. Remove the Air Cleaner (ACL) outlet tube. For additional information, refer to Intake Air Distribution and Filtering [1][2]Diagrams.

2. Remove the accessory drive belt. For additional information, refer to Accessory Drive [1][2]Diagrams.

3. Using the Fan Pulley Holding Wrench and the Fan Clutch Nut Wrench, remove the fan and fan clutch assembly and position it inside the shroud.
- To install, tighten to 55 Nm (41 lb-ft).





4. Remove the 2 fan shroud bolts. Lift the fan and fan clutch assembly and the fan shroud together and remove from the vehicle.
- To install, tighten to 6 Nm (53 lb-in).

5. To install, reverse the removal procedure.