Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Edge AWD V6-3.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Brake Rotor/Disc >> Service and Repair >> Rear Disc Brake >> Brake Disc Shield

Brake Disc Shield




Brake Disc Shield









Removal and Installation

1. Remove the brake caliper anchor plate. For additional information, refer to Brake Caliper Anchor Plate Brake Caliper Anchor Plate.

2. Remove and discard the brake disc screw and remove the brake disc.
- To install, tighten to 20 Nm (177 lb-in).


3. Remove the 3 bolts and the brake disc shield.
- To install, tighten to 15 Nm (133 lb-in).


4. To install, reverse the removal procedure.
pro multis · About Operation CHARM