Halfshaft Seal - LH

Halfshaft Seal - LH





Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the front LH halfshaft.

3. Using an awl, poke a small hole in the halfshaft seal.





4. Using a dent puller, remove and discard the halfshaft seal.





Installation

1. Install a new halfshaft seal on the Differential Seal Installer and Handle.





2. Using the Differential Seal Installer and Handle, install the LH halfshaft seal.





3. Install the front LH halfshaft.

4. Check and top off the transmission fluid to the correct level. For additional information, refer to Transmission Fluid Level Check Preliminary Inspection.