Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Escape 2WD V6-3.0L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Coil >> Service and Repair >> Ignition Coil-On-Plug
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil-On-Plug




Ignition Coil-On-Plug





Removal and Installation

LH side

1. Remove the Air Cleaner (ACL).

RH side

2. NOTE: The upper intake manifold must be removed to access the RH ignition coils only.

Remove the upper intake manifold.

Both sides

3. Disconnect the ignition coil electrical connectors.

4. NOTE: When removing the ignition coils, a slight twisting motion will break the seal and ease removal.

Remove the bolts and the ignition coils.
- To install, tighten to 7 Nm (62 lb-in).


5. To install, reverse the removal procedure.
- Apply a small amount of dielectric grease to the inside of the ignition coil boots before attaching to the spark plugs.

pro multis · About Operation CHARM