Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1994 >> Taurus V6-232 3.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Pinpoint Tests >> X - Constant Control Relay Module (CCRM) >> X42 - Jumper High Fan Control (HFC) Signal to Ground
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

X42 - Jumper High Fan Control (HFC) Signal to Ground



- Key "OFF".

- Inspect Powertrain Control Module (PCM) for damaged or pushed out pins, corrosion, loose wires, etc. Service as necessary.

- Install breakout box, leave PCM disconnected.

- Constant Control Relay Module (CCRM) connected.

- Key "ON", engine "OFF".

- Jumper test pin 31 to test pin 40 at the breakout box.

- Does fan speed change from low to high?

Yes -- Go to X44. X44 - Check ECT Sensor

No -- Replace CCRM. Remove breakout box. Reconnect PCM. Re-evaluate symptom.
pro multis · About Operation CHARM