Test A: Shift and Torque Converter Clutch Solenoids (Only)
NOTE: Refer to the Transaxle Vehicle Harness Connector illustration preceding these pinpoint tests.NOTE: Refer to the Transaxle Internal Harness Diagram illustration preceding these pinpoint tests.
NOTE: Read and record all DTCs. All TR sensor and OSS DTCs must be repaired before entering Output State Control (OSC)
Test A1-A2:
Test A3-A6:
Test A6-A8:
Test A8-A9:
Test A10-A12:
Test A13-A14:
PINPOINT TEST A: SHIFT AND TORQUE CONVERTER CLUTCH SOLENOIDS (ONLY)