Intake Manifold: Specifications

Intake manifold bolts 18 Nm (13 ft. lbs.)

NOTE: 2.0L engine shown, 2.3L engine similar.

Inspect and install new intake manifold gaskets if necessary.





2.3L engines

NOTE: Be sure to install the bolts in the previously marked locations.

NOTE: To ease installation of the intake manifold, lower center mounting bolt, use a 6-inch long, 5/16-inch diameter hose.

Install the intake manifold and the 7 mounting bolts.
Tighten to 18 Nm (13 ft. lbs.)





2.0L engines

NOTE: Be sure to install the bolts in the previously marked locations.

Install the intake manifold and the 7 mounting bolts.
Tighten to 18 Nm (13 ft. lbs.)





All engines
Install the lower intake manifold bolt.
Tighten to 18 Nm (13 ft. lbs.)