Test I: DTC B2792 - Cross Link Between Firing Loops
PINPOINT TEST I: DTC B2792 - CROSS LINK BETWEEN FIRING LOOPSNormal Operation
The fire suppression module monitors all of the firing loops circuits for a cross-link between the circuits of another firing loop. If the fire suppression module detects a short between the circuits of a firing loop and another firing loop, it stores a DTC B2792 in memory and illuminates the fire suppression system indicator.
DTC B2792 (Cross Link Between Firing Loops) - sets when the fire suppression module detects a short between the circuits of 2 different firing loops. This DTC will cause the fire suppression system indicator to illuminate.
This pinpoint test is intended to diagnose the following:
- Short circuit between firing loops
- LH fire suppressor
- RH fire suppressor
- Fire suppression module
