Test K: DTC B2293 - Restraint System - Airbag Fault

PINPOINT TEST K: DTC B2293 - RESTRAINT SYSTEM - AIRBAG FAULT

Lamp Fault Codes (LFCs)
The following LFCs indicate the specific fault PIDs associated with DTC B2293:







Normal Operation
The restraints control module (RCM) monitors all front air bag module circuits for faults. The RCM will set a DTC if a short to battery or short to ground fault is detected. The RCM will also set a DTC if the loop resistance is less than 0.9 ohm or greater than 5.0 ohms. If the RCM detects a fault on any of the front air bag circuits, it will store DTC B2293 in memory and depending on the fault, flash a LFC on the air bag warning indicator.

Part 1:

Part 2:

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Clockspring
- Driver/Passenger air bag module
- RCM

K1:

K2:

K2-K4:

K5-K7:

K7-K8:

K9-K11:

K11-K12:

K13-K15:

K15-K16:

K17-K19:

K19-K20:

K20-K22:

K22-K24:

K24-K25:

K26-K28:

K28-K30:

K30-K32:

K32-K33:

K34-K36:

K36-K37:

K38:

K38-K39: