Test B: A Single Power Window Is Inoperative - Passenger Front

PINPOINT TEST B: A SINGLE POWER WINDOW IS INOPERATIVE - PASSENGER FRONT

Normal Operation
During normal operation, battery voltage is provided to the passenger power window motor at all times through circuit 2033 (BN/LB). When the accessory delay relay is active, the passenger power window motor receives voltage through circuit 170 (RD/LB). Ground is provided to the passenger power window motor through circuit 1205 (BK). Pulling the driver or passenger window control switch up provides voltage to the window motor through circuit 313 (WH/YE) to command the window up. Pressing the driver or passenger window control switch down provides voltage to the window motor through circuit 314 (TN/LB) to command the window down.

This pinpoint test is intended to diagnose the following:
- Fuse(s)
- Wiring, terminals or connectors
- Passenger window control switch
- Driver window control switch
- Window motor
- Smart junction box (SJB)

B1-B3:

B3-B5:

B6-B8:

B9-B10:

B11-B12: