Oil Pan: Specifications

NOTE: The oil pan and the 4 specified bolts must be installed within 4 minutes of the start of sealant application.

Oil pan and bolts 10, 11, 13 and 14:
Tighten bolts in the sequence shown 3 Nm (27 lb-in)
Loosen the bolts 180 degrees





Align the oil pan to the cylinder block and A/C compressor:
Position the oil pan so the mounting boss is against the A/C compressor and using a straightedge, align the oil pan flush with the rear of the cylinder block at the 2 areas shown.





Tighten bolts 10, 11, 13 and 14 in the sequence shown to 3 Nm (27 lb-in)





Install the remaining oil pan bolts. Tighten all the oil pan bolts in the sequence shown.
large bolts (1-14) 20 Nm (15 lb-ft)
small bolts (15 and 16) 10 Nm (89 lb-in)