Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2010 >> Taurus AWD V6-3.5L >> Repair and Diagnosis >> Wiper and Washer Systems >> Windshield Washer Pump >> Service and Repair >> Washer Pump
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Washer Pump




Washer Pump





Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Remove the front lower air deflector. For additional information, refer to the Front Bumper Exploded View in Bumper.

3. Remove the RH front fender splash shield.

4. WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in serious personal injury.

NOTICE: When installing a new washer pump, be careful not to damage the rubber grommet.

NOTE: To prevent spilling windshield washer fluid, drain the washer reservoir before washer pump removal.
Remove the washer pump in the following sequence.

1. Disconnect the electrical connector.

2. Disconnect the washer hose.

3. Remove the washer pump.

5. NOTICE: Do not operate the washer pump prior to filling the washer reservoir. Failure to follow this instruction may result in premature washer pump failure.

To install, reverse the removal procedure.

- Fill the washer reservoir with windshield washer fluid.

pro multis · About Operation CHARM