Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2011 >> Fiesta L4-1.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatically Shifted Manual Transmission/Transaxle >> Service and Repair >> Removal and Replacement >> Transaxle Components >> Manual Control Lever Shaft Seal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Manual Control Lever Shaft Seal




Manual Control Lever Shaft Seal





Removal

1. Remove the transaxle. For additional information, refer to Transaxle Transaxle.

2. Remove and discard the manual control lever bolt and remove the manual control lever.





3. Install the special tool.





4. NOTE: Use care to prevent clutch housing cup plug from being dislodged.

Using the special tool and a suitable tool, apply slight pressure to the special tool, remove and discard the manual control lever seal.





5. Inspect the transaxle case bore for debris or damage. Clean and/or repair as needed.

Installation

1. Using the special tools, install the new manual control lever shaft seal.





2. Install the manual control lever and the new manual control lever bolt.
- Tighten to 26 Nm (19 lb-ft).





3. Install the transaxle. For additional information, refer to Transaxle Transaxle.

pro multis · About Operation CHARM