Quarter Trim Panel - 2-Door

Quarter Trim Panel - 2-Door

Removal and Installation

1. Remove the C-pillar trim panel. For additional information, refer to C-Pillar Trim Panel C-Pillar Trim Panel.

2. Remove the door scuff plate trim panel. For additional information, refer to Scuff Plate Trim Panel Service and Repair.

3. Position aside the door weatherstrip.

4. Remove the lower anchors and tethers for children and the rear seat backrests. For additional information, refer to Seating Seat Backrest - Rear.

5. Remove the safety belt retractor bezel.

6. NOTICE: The quarter trim panel has 2 crash foam blocks that are adhered to it. Care must be taken not to damage the crash foam blocks during removal and installation.

Remove the quarter trim panel.

- Pull the quarter trim panel outward to release the quarter trim panel retaining clips.

7. NOTICE: To avoid damage to the quarter trim panel, remove any retaining clips from the body and attach the clips to the quarter trim panel before installing.

To install, reverse the removal procedure.

- To install, make sure to align the trim panel retaining clips to the retaining clip holes in the body.