Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Pinpoint Test R: An Individual Fog Lamp Is Inoperative




Fog Lamps

Pinpoint Tests

Pinpoint Test R: An Individual Fog Lamp Is Inoperative

Refer to Wiring Diagram Set 86, Fog Lamps for schematic and connector information. Diagrams By Number

Normal Operation

When the fog lamp relay is energized, voltage is routed to the fog lamps.

This pinpoint test is intended to diagnose the following:

- Wiring, terminals or connectors


PINPOINT TEST R: AN INDIVIDUAL FOG LAMP IS INOPERATIVE

NOTICE: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.

-------------------------------------------------
R1 CHECK FOR VOLTAGE TO THE INOPERATIVE FOG LAMP


- Ignition OFF.
- Disconnect: Inoperative Fog Lamp.
- Ignition ON.
- Place the headlamp switch in the PARKING LAMPS ON position and engage the fog lamps.
- Measure the voltage between the LH fog lamp C152-2, circuit CLF12 (BN/YE), harness side and ground; or between the RH fog lamp C162-2, circuit CLF12 (BN/YE), harness side and ground.




- Is the voltage greater than 10 volts?

Yes
REPAIR circuit GD120 (BK/GN) (LH fog lamp) or GD164 (BK/VT) (RH fog lamp) for an open. TEST the system for normal operation.

No
REPAIR circuit CLF12 (BN/YE) for an open. TEST the system for normal operation.

-------------------------------------------------