Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Gearshift Lever




Gearshift Lever

Removal and Installation









1. Remove the gearshift lever knob.
- To install, tighten to 15 Nm (133 lb-in).

2. Remove the floor console.

3. Remove the shift cable ends from the gearshift levers in the following sequence.

1. Carefully pry the gearshift cables from the shift levers.

2. Pull back on abutment sleeve and lift cable out of shifter.

4. Remove the 4 gearshift lever bolts and the gearshift lever.
- To install, tighten to 9 Nm (80 lb-in).





5. To install, reverse the removal procedure.
- Adjust the gearshift cables. For additional information, refer to Manual Transaxle/Transmission and Clutch - General Information Adjustments.