Selector Lever Cable Adjustment - 6F35

Selector Lever Cable Adjustment - 6F35

1. Disconnect the selector lever cable end from the manual control lever.





2. NOTE: Select switch shown, Transmission Control Switch (TCS) similar.

Place the selector lever in the D position.





3. Place the manual control lever in the D position.

1. Rotate the manual control lever counterclockwise to the PARK position.

2. Rotate the manual control lever clockwise 3 detents to the D position.





4. Release the selector lever cable adjuster lock.

1. Pull out on the adjuster lock tabs.

2. Slide the lock up to unlock the selector lever cable.





5. Align the selector lever cable end to the manual control lever ball stud and install it with the adjuster unlocked.





6. Slide the adjuster tab in place to lock the selector lever cable.





7. Verify that the vehicle starts in PARK and NEUTRAL only and that the reverse lamps illuminate in REVERSE.