Cruise Control Deactivator Switch

Cruise Control Deactivator Switch

NOTICE: Do not press, pull or otherwise move the brake pedal while installing the stoplamp switch and cruise control deactivation switch. Install these switches with the booster push rod attached to the brake pedal and with the brake pedal in the at-rest position. Installing these switches with the brake pedal in any other position results in incorrect adjustment and damages the switches.

NOTE: Brake pedal cruise control deactivator switch shown. Clutch pedal cruise control deactivator switch similar.









1. Rotate the cruise control deactivator switch counterclockwise one-quarter turn to remove.

2. If equipped with an automatic transmission, perform the brake pedal switch adjustment. For additional information, refer to Vehicle Dynamic Systems Adjustments.