Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Focus L4-2.0L >> Repair and Diagnosis >> Body and Frame >> Body Control Systems >> Testing and Inspection >> Pinpoint Tests >> Diagnostic Routine K
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Diagnostic Routine K




Diagnostic Routine K

Diagnostic Overview

U0100:00

Normal Operation and Fault Conditions

DTC Fault Trigger Conditions





Pinpoint Test

1. VERIFY THE SCAN TOOL CAN COMMUNICATE WITH THE PCM (Powertrain Control Module)

1. Connect the scan tool.

2. Check that a vehicle session can be established using the scan tool.

Can a vehicle session be established?






2. CHECK THE BCM (Body Control Module) CONTINUOUS MEMORY DTCs (Diagnostic Trouble Codes)

1. Ignition ON.

2. Using a scan tool, perform the BCM (Body Control Module) self-test.

3. Clear the DTCs (Diagnostic Trouble Codes).

4. Wait 10 seconds.

5. Repeat the BCM (Body Control Module) self-test.

Is DTC (Diagnostic Trouble Code) U0100:00 retrieved again?






3. RETRIEVE THE RECORDED DTCs (Diagnostic Trouble Codes) FROM THE PCM (Powertrain Control Module) KOEO (Key ON Engine OFF) SELF-TEST

1. Using a scan tool, perform the PCM (Powertrain Control Module) KOEO (Key ON Engine OFF) self-test.

Is DTC (Diagnostic Trouble Code) P0562 or DTC (Diagnostic Trouble Code) P0563 recorded?






4. RETRIEVE THE RECORDED DTCs (Diagnostic Trouble Codes) FROM THE BCM (Body Control Module) SELF-TEST

1. Using a scan tool, perform the BCM (Body Control Module) self-test.

Are any DTCs (Diagnostic Trouble Codes) recorded?






5. CHECK FOR DTC (Diagnostic Trouble Code) U0100:00 SET IN OTHER MODULES

1. Ignition ON.

2. Using a scan tool, retrieve all continuous memory DTCs (Diagnostic Trouble Codes).

Is DTC U0100:00 set in the ABS (Anti-Lock Brake System) module or in the RCM (Restraints Control Module)?





pro multis · About Operation CHARM