Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Focus L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Testing and Inspection >> Pinpoint Tests >> Automatic Transaxle-Transmission External Controls - Transmission Control Switch (TCS) >> Diagnostic Routine C
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Diagnostic Routine C




Diagnostic Routine C

Diagnostic Overview

B1319:11

Refer to Wiring Diagram Set 37 for schematic and connector information Electrical Diagrams.

Normal Operation and Fault Conditions

The BSIA (Brake Shift Interlock Actuator) system is controlled by the BCM (Body Control Module) and is activated when the BCM (Body Control Module) receives a brake pedal applied input.

DTC Fault Trigger Conditions






Pinpoint Test

1. Read and record all DTCs (Diagnostic Trouble Codes)

Is DTC (Diagnostic Trouble Code) B1319:11 set?






2. Check the BSIA (Brake Shift Interlock Actuator) power circuit for a short to ground

1. Disconnect the floor shifter C3245.

2. Disconnect the BCM (Body Control Module) C2280C.

3. Inspect the connectors for damaged or pushed out terminals.

4. Measure the resistance of circuit CET52 (GN) from the floor shifter C3245-3 to ground.





Is the resistance greater than 10,000 ohms?





pro multis · About Operation CHARM