Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2012 >> Taurus AWD V6-3.5L >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Removal and Replacement >> Seat Cushion - Rear
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Cushion - Rear




Seat Cushion - Rear









Removal and Installation

1. From under the front of the cushion assembly, push the 2 cushion floor latch release levers toward the driver side, while lifting up to disengage the front of the cushion assembly.





2. NOTE: RH electrical connectors on top, LH on bottom.
Remove the cushion assembly in the following sequence.

1. Push the cushion back as far as possible.

2. Lift up and pull forward at the rear outboard ends of the cushion, disengaging the wires from the retainer hooks.

3. Disconnect the heated seat electrical connector(s) (if equipped).

4. Remove the cushion.






3. To install, reverse the removal procedure.
- Before installation, make sure the safety belts and buckles are accessible to the occupants.

pro multis · About Operation CHARM