Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Special Tools

J 41712 Oil Pressure Switch Socket

Removal Procedure

1. Turn the ignition OFF.
2. Disconnect the oil pressure sensor electrical connector.
3. Remove the oil pressure sensor (1).

Installation Procedure

Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the oil pressure sensor (1).

Tighten the oil pressure sensor to 20 Nm (15 lb ft).

2. Connect the oil pressure sensor electrical connector.