Camshaft Replacement - Right Side

Camshaft Replacement - Right Side

Removal Procedure

1. Remove the intake manifold. Refer to Intake Manifold Replacement Intake Manifold Replacement.

2. Remove the camshaft cover. Refer to Camshaft Cover Replacement - Right Side Camshaft Cover Replacement - Right Side.

3. Remove the camshaft sensors. Refer to Camshaft Position Sensor Replacement - Bank 1 (Right Side) Exhaust Camshaft Position Sensor Replacement - Bank 1 (Right Side) Exhaust and Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake.

4. Remove the intake camshaft position actuator solenoid. Refer to Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake.

5. Remove the Camshaft Position Actuator. Refer to Camshaft Position Actuator Replacement - Bank 1 Camshaft Position Actuator Replacement - Bank 1.

6. Remove the camshaft bearing caps and the camshaft. Refer to Camshaft Removal - Right Side Camshaft Removal - Right Side.

Installation Procedure





Note:

* Ensure that the marks on the camshaft position actuators and the timing chain (15-18) are aligned.

* DO NOT tighten the camshaft position actuator bolt at this time.

1. Locate the camshafts to the cylinder head and assemble the camshaft actuators to the camshafts.

2. Install the camshafts and the camshaft bearing caps. Refer to Camshaft Installation - Right Side Camshaft Installation - Right Side.





Caution: Refer to Torque Reaction Against Timing Drive Chain Caution Service Precautions.

Note: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.

3. Install and tighten the camshaft position actuators. Refer to Camshaft Position Actuator Installation - Right Side Intake Camshaft Position Actuator Installation - Right Side Intake and Camshaft Position Actuator Installation - Right Side Exhaust Camshaft Position Actuator Installation - Right Side Exhaust.

4. Install the intake camshaft position actuator solenoid. Refer to Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake.

5. Install the camshaft sensors. Refer to Camshaft Position Sensor Replacement - Bank 1 (Right Side) Exhaust Camshaft Position Sensor Replacement - Bank 1 (Right Side) Exhaust and Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake.

6. Install the camshaft cover. Refer to Camshaft Cover Replacement - Right Side Camshaft Cover Replacement - Right Side.

7. Install the intake manifold. Refer to Intake Manifold Replacement Intake Manifold Replacement.