Rear Fuse Box (Rear MICU) Removal and Installation

Rear Fuse Box (Rear MICU) Removal and Installation

NOTE: SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service Precautions before doing repairs or servicing.

Removal

1. Do the battery terminal disconnection procedure.

2. Remove the left rear side trim panel Interior Trim Removal/Installation - Rear Side Area.

3. Disconnect the connectors from the rear fuse box (A).





4. Remove the mounting bolts (B), then remove the rear fuse box.

Installation

1. Connect the connectors to the rear fuse box, then install the rear fuse box in the reverse order of removal.

2. Install the removed parts in the reverse order of removal.

3. Do the battery terminal reconnection procedure.

4. Confirm that all systems work properly.