DTC 107

DTC 107: TCS Operation

NOTE: The ABS/TCS indicators do not come on by memorizing the DTC 107.

1. Clear the DTC using the HDS.
2. Disconnect the HDS from the 16P DLC.
3. Turn the ignition switch OFF, then turn it ON (II) again.
4. Test-drive the vehicle.
Is DTC 107 indicated?
YES - Check for loose terminals in the ABS/TCS control unit 47P connector. If necessary, substitute a known-good ABS/TCS modulator-control unit, and recheck.
NO - Intermittent failure; the system is OK at this time.