DTC 122

DTC 121, 122, 123, 124: TCS Solenoid
1. Clear the DTC using the HDS.
2. Disconnect the HDS from the 16P DLC.
3. Turn the ignition switch OFF, then turn it ON (II) again.
4. Test-drive the vehicle.
Does the TCS indicator come on, and is DTC 121, 122, 123, or 124 indicated?
YES - Check for loose terminals in the ABS/TCS control unit 47P connector. If necessary, substitute a known-good ABS/TCS modulator-control unit, and recheck.
NO - Intermittent failure; the system is OK at this time.