DTC 52
DTC 52: Motor Stuck OFF1. Check the No. 17 (30 A) fuse in the under-hood fuse/relay box.
Is the fuse OK?
YES - Reinstall the fuse, and go to step 2.
NO - Replace the fuse, and recheck.
2. Disconnect the ABS/TCS control unit 47P connector.
3. Measure the voltage between the ABS/TCS control unit 47P connector terminal No. 16 and body ground.
Is there battery voltage?
YES - Go to step 4.
NO - Repair open in the wire between the No. 17 (30 A) fuse and the ABS/TCS modulator-control unit.
4. Reconnect the ABS/TCS control unit 47P connector.
5. Turn the ignition switch ON (II).
6. Measure the voltage between the ABS/TCS control unit 47P connector terminal No. 47 and body ground.
Is there less than 0.1 V?
YES - Check for loose terminals in the ABS/TCS control unit 47P connector. If necessary, substitute a known-good ABS/TCS modulator-control unit, and recheck.
NO - Repair open in the wire between the ABS/TCS modulator-control unit and body ground (G203).