Front Splash Shield Replacement (2-Door)

Front Splash Shield Replacement

2-door

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the front bumper or the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the splash shield (A).

1. Detach the clips (B) securing the front inner fender (C) and the splash shield to the body.

2. From under the front bumper (D), detach the clips (E).

3. From under the body, detach the clips (F).

4. Release the hooks (G) of the splash shield, then pull the splash shield out.

NOTE: To release the clips, pry up on the center pin at the notch (H).





2. Install the splash shield in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.