Trunk / Liftgate: Adjustments

TRUNK LID

Exploded View BL-201:

Fitting Adjustment




1. Check the clearance and the evenness between the trunk lid and each part by visual and tactile feeling. (Fitting standard dimension in the table should be satisfied.)
2. In case out of specification, adjust them according to the procedures shown here.
- Loosen the bumper rubber.
- Loosen the striker mounting bolts.
- Lift up the trunk lid approx. 100 - 150 mm (3.94 - 5.91 in) height then close it lightly and make sure it engaged firmly with the trunk lid closed.
- Check the clearance and evenness.
- Finally tighten the trunk lid striker.