Exhaust Gas Recirculation (EGR) Valve - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.Remove the EGR tube and upper intake manifold Intake Manifold - Removal.





2. Disconnect the right bank ignition wires (cylinders 1, 3 and 5) from the spark plugs.
3. Disengage the ignition wire harness tray (1) from the valve cover studs and reposition the ignition wire harness.





4. Disconnect the electrical connector (2) from the EGR valve (1).





5. For vehicles equipped with an automatic transmission, raise and secure the vehicle on a hoist Service and Repair
6. Remove the bolt (1) from the transmission fluid level indicator tube and reposition the tube.





7. Lower the vehicle.
8. Remove the two EGR valve mounting bolts (3) and remove the EGR valve (1).
9. Discard the gasket (2).