Valve Rocker Arm - Removal

REMOVAL





1. Remove cylinder head cover.Cylinder Head Cover(s) - Removal.





2. Install Push Rod Retaining Plate 9070 (1).





3. Loosen the rocker shafts using the sequence provided.

CAUTION: The rocker shaft assemblies are not interchangeable between intake and exhaust. The intake rocker arms are marked with an "I".

4. Remove the rocker shafts. Note location for reassembly.

CAUTION: The longer push rods are for the exhaust side, and the shorter push rods are for intake side.

5. Remove the push rods. Note push rod location for reassembly.










CAUTION: Do not remove the retainers (1) from the rocker shaft (3).