Battery Tray - Removal

REMOVAL






WARNING: The battery negative and positive cable polarity are different from the gasoline engine equipped vehicles to the diesel engine equipped vehicles. Please note the location of the positive and negative cables prior to service of the battery or related components.

NOTE: Left hand drive gasoline engine shown, left hand drive diesel similar. Right hand drive gasoline and diesel similar with the battery and related components packaged on the left side of the engine compartment.

1. Disconnect and isolate the battery negative cable.
2. Disconnect the fresh air tube (2) from the air cleaner assembly (1).
3. Remove the air cleaner assembly (1) from the battery tray (4) by pulling up on the air cleaner to disengage the mounting pins.
4. Remove the battery, Battery - Removal.
5. Remove the Totally Integrated Power Module, Totally Integrated Power Module (TIPM) - Removal.





6. Remove the four bolts (2 and 5) and one nut (3) securing the battery tray (4) to the vehicle.
7. Lift the battery tray out of the engine compartment and remove from the vehicle.