Fluid Pan: Service and Repair

Fluid pan - reseal
Remove
1. Drain gearbox fluid.
2. Remove fluid cooler.





3. Release multiplugs from clips attached to fluid pan.
4. Remove 21 bolts securing fluid pan to gearbox.
5. Remove fluid pan.

Refit
1. Clean fluid pan and mating face on gearbox.
2. Apply liquid gasket to contact faces of fluid pan and gearbox.
3. Position fluid pan, fit bolts and tighten progressively to 7 Nm (5 ft. lbs.).
4. Secure multiplugs to clips.
5. Fit fluid cooler.