Removal

ENGINE IMMOBILIZER: TRANSPONDER KEY AMPLIFIER:

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH Removal

2. REMOVE FRONT FLOOR FOOTREST Removal

3. REMOVE COWL SIDE TRIM BOARD LH Removal

4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ORNAMENT Removal

6. REMOVE INSTRUMENT PANEL FINISH PLATE Removal

7. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL RH Removal







8. REMOVE TRANSPONDER KEY AMPLIFIER
NOTE: Take care not to use excessive force to prevent the transponder key amplifier from being damaged.

(a) Widen the claw attached to the upper bracket by approximately. 1.0 mm (0.039 in.) using a screwdriver.
(b) Pull the transponder key amplifier toward the rear of the vehicle with the claw open to remove it.