Removal

CELLULAR COMMUNICATION: MAYDAY ECU:

REMOVAL

1. REMOVE REAR SEAT ASSEMBLY RH Removal

2. REMOVE REAR SEAT ASSEMBLY LH Removal

3. REMOVE QUARTER SCUFF PLATE INSIDE LH Removal

4. REMOVE QUARTER SCUFF PLATE INNER RH Removal

5. REMOVE NO. 3 SEAT ANCHOR RAIL

(a) Remove the screw.
(b) Disengage the clip and remove the No. 3 seat anchor rail.
6. REMOVE NO. 1 SEAT ANCHOR RAIL

(a) Remove the screw.
(b) Disengage the 2 clips and remove the No. 1 seat anchor rail.
7. REMOVE NO. 2 SEAT ANCHOR RAIL RH

(a) Remove the screw.
(b) Disengage the clip and remove the No. 2 seat anchor rail RH.
8. REMOVE MOBILEPHONE COVER

(a) Turn back the floor carpet.

(b) Disengage the 12 clips.
(c) Disengage the 5 claws and remove the mobilephone cover.
9. REMOVE MAYDAY ECU ASSEMBLY

(a) Remove the 3 screws and the 3 mobilephone brackets.
(b) Disconnect the 4 connectors and remove the mayday ECU.
10. REMOVE MAYDAY BATTERY

(a) Remove the 2 screws and the 2 mobilephone brackets.
(b) Disconnect the connector and remove the mayday battery.
11. REMOVE MAYDAY WIRE

(a) Disconnect the 4 connectors.

(b) Disengage the 6 clamps and remove the mayday wire.
12. REMOVE MOBILEPHONE BRACKET

(a) Disengage the wire harness clamp from the mobilephone bracket.
(b) Remove the 2 screws and the mobilephone bracket.
13. REMOVE TELEPHONE BRACKET

(a) Disengage the 4 claws of the wire harness clamp and disconnect the wire harness.

(b) Disengage the wire harness clamp.