Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2008 >> IS F V8-5.0L (2UR-GSE) >> Repair and Diagnosis >> Body and Frame >> Mirrors >> Testing and Inspection >> Component Tests and General Diagnostics >> Power Mirror Control System >> Power Source Circuit
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Source Circuit









MIRROR (EXT): POWER MIRROR CONTROL SYSTEM: Power Source Circuit

Power Source Circuit

DESCRIPTION

This is the power source circuit for the outer mirror control ECU.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK OUTER MIRROR CONTROL ECU (OUTER MIRROR CONTROL ECU POWER SOURCE)





(a) Disconnect the M10 connector*1.
(b) Disconnect the L10 connector*2.
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:





HINT:
- *1: for LH side
- *2: for RH side

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
pro multis · About Operation CHARM