Installation

MIRROR: INNER REAR VIEW MIRROR: INSTALLATION

INSTALLATION





1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY
(a) Using a T20 "TORX" socket wrench, install the inner rear view mirror with the screw.
Torque: 1.8 Nm (18 kgf-cm, 16 in-lbf)
(b) Connect the connector.
2. INSTALL INNER REAR VIEW MIRROR COVER (W/O Rain Sensor)





(a) Attach the 2 claws to install the cover.





3. INSTALL RAIN SENSOR COVER (W/ Rain Sensor)
(a) Attach the 2 claws to install the rain sensor cover.
(b) Push the stopper as shown in the illustration to fix the cover in place.
4. INSTALL MAP LIGHT ASSEMBLY Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL COWL TOP VENTILATOR LOUVER RH Installation