Installation

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY





(a) Install the front seat inner belt assembly with the nut.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTE:
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.





(b) for Driver Seat:
Connect the 3 connectors and attach the 5 clamps.
(c) for Passenger Seat:
Connect the 2 connectors and attach the clamp.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. INSTALL FRONT SEAT ASSEMBLY Installation
4. INSTALL COWL TOP VENTILATOR LOUVER RH Installation
5. CONNECT FRONT SEAT OUTER BELT ASSEMBLY Installation
6. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

7. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.