Windshield Wiper Motor Removal/Installation

WINDSHIELD WIPER MOTOR REMOVAL/INSTALLATION

NOTE:A new wiper motor assembly comes with the linkage arm installed.
1. Remove the wiper mounting arm and pivot shaft. See Wiper Mounting Arm And Pivot Shaft Removal/Installation.






2. Separate the wiper motor linkage arm from the wiper mounting arm and pivot shaft assembly.

- Use a suitable tool at the location shown to separate the wiper linkage arm from the wiper mounting arm and pivot shaft assembly.

CAUTION:Do not remove the wiper motor linkage arm from the wiper motor assembly. If the arm is removed, the wiper arms may not park in the correct location.
3. Remove the 3 bolts and the wiper motor.

- To install, tighten to 13 Nm {1.3 kgf-m, 115 in-lbf}.

4. To install, reverse the removal procedure.