Fender Splash Shield Removal/Installation
FENDER SPLASH SHIELD REMOVAL/INSTALLATION
1. Remove the 3 fender splash shield bolts.
- To install, tighten to 5 Nm {0.5 kgf-m, 44 in-lbf}.
2. Remove the 7 fender splash shield pin-type retainers.
3. Remove the 6 fender splash shield screws.
- To install, tighten to 5 Nm {0.5 kgf-m, 44 in-lbf}.
4. Remove the fender splash shield.
5. To install, reverse the removal procedure.