Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2009 >> RX8 2RTR-1.3L >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Overhaul >> Front Seat Cushion Trim Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Seat Cushion Trim Removal/Installation




FRONT SEAT CUSHION TRIM REMOVAL/INSTALLATION

1. Turn the ignition switch to LOCK position.

2. Disconnect the negative battery cable and wait 1 min or more.

3. Remove the front seat. Front Seat Removal/Installation

4. Remove the side cover. Front Seat Side Cover Removal/Installation

5. Detach hook A by sliding it in the order of (1), (2), and (3) as shown in the figure.






6. Detach hook B and C in the direction of the arrow shown in the figure.

7. Remove the seat cushion trim and the seat cushion pad from the seat frame as a single unit.






8. Remove rings C in the order of (4), (5), (6), (7) and (8) as shown in the figure, then remove the seat cushion trim from the seat cushion pad in the direction of the arrow shown in the figure.






9. Install in the reverse order of removal.

pro multis · About Operation CHARM