Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 2 L4-1.5L >> Repair and Diagnosis >> Body and Frame >> Fender >> Front Fender >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Fender: Service and Repair




FRONT FENDER PANEL REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Sail garnish (See Service and Repair)

b. Side turn lights (See Side Turn Light Removal/Installation)

c. Front bumper (See Front Bumper Removal/Installation)

d. Front combination lights (See Service and Repair)

e. Side step molding (vehicles with side step molding) (See ) (See )

3. Remove fastener A, then remove the front fender molding in the direction of the arrow shown in the figure.






4. Remove bolt B and clip C, then remove the front bumper slider.






5. Remove bolts D, then remove the front fender panel in the direction of the arrow shown in the figure.






6. Install in the reverse order of removal.

7. Adjust the headlight aiming. (See Adjustments)

pro multis · About Operation CHARM