Coolant Reservoir: Service and Repair

COOLANT RESERVE TANK REMOVAL/INSTALLATION [MZR 1.5]

WARNING:
- Never remove the cooling system cap or loosen the radiator drain plug while the engine is running, or when the engine and radiator are hot. Scalding engine coolant and steam may shoot out and cause serious injury. It may also damage the engine and cooling system.
- Turn off the engine and wait until it is cool. Even then, be very careful when removing the cap. Wrap a thick cloth around it and slowly turn it counterclockwise to the first stop. Step back while the pressure escapes.
- When you are sure all the pressure is gone, press down on the cap using the cloth, turn it, and remove it.

1. Remove in the order indicated in the table.

2. Install in the reverse order of removal.









Coolant Reserve Tank Installation Note

1. Insert the projection on the lower side of the coolant reserve tank into the insertion hole of the radiator cowling, then tighten the coolant reserve tank installation bolt.