Transaxle Oil Replacement

TRANSAXLE OIL REPLACEMENT [F35M-R]

1. Park the vehicle on level ground.

2. Remove the hole cover.

3. Remove the drain plug with the washer.

4. Drain the transaxle oil.

5. Install a new washer and the drain plug.

Tightening torque
- 39-59 Nm {4.0-6.0 kgf-m, 29-43 ft-lbf}

6. Add the specified amount and type of oil through the hole cover installation hole until the level reaches as shown in the figure.






Manual transaxle oil grade
- API service GL-4

Manual transaxle oil viscosity
- SAE 75W-80

Manual transaxle oil capacity (approx. quantity)
- 2.91 L {3.07 US qt, 2.56 Imp qt}

7. Install the hole cover.






Tightening torque
- 8-11 Nm {82-112 kgf-cm, 71-97 in-lbf}