Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 2 L4-1.5L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Arm >> Service and Repair >> Windshield Wiper Arm And Blade Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Windshield Wiper Arm And Blade Removal/Installation




WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION

WARNING:
- When the switch the ignition to ON, and the wiper and washer switch is in the AUTO position, the windshield wipers could operate accidentally under the following conditions. Always switch the ignition, and the wiper and washer switch off before handling the windshield wipers; otherwise a pinched hand or fingers could result in injury or a wiper system malfunction:

- The windshield in the rain sensor installation area is touched.
- The windshield is subjected to an impact.
- The rain sensor is subjected to an impact from inside the vehicle.
- Water is poured on the windshield.

1. Remove in the order indicated in the table.










2. Install in the reverse order of removal.

3. Adjust the windshield wiper arm and blade. Windshield Wiper Arm And Blade Adjustment

Windshield Wiper Arm Installation Note

1. Clean the serrated connecting part with a wire brush before installing the windshield wiper arm.






pro multis · About Operation CHARM