Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2011 >> 6 L4-2.5L >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair >> Removal and Replacement >> Seal Plate Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seal Plate Removal/Installation




SEAL PLATE REMOVAL/INSTALLATION

Right-side

1. Disconnect the negative battery cable.

2. Remove the front bumper. (See Front Bumper Removal/Installation)

3. Remove the front energy-absorbing form. (See Energy-Absorbing Foam Removal/Installation)

4. Remove the fasteners.






5. Pull the seal plate in the direction of the arrow shown in the figure, and then remove the tab.

6. Remove the seal plate.

7. Install in the reverse order of remove.

Left-side

1. Disconnect the negative battery cable.

2. Remove the front bumper. (See Front Bumper Removal/Installation)

3. Remove the front energy-absorbing form. (See Energy-Absorbing Foam Removal/Installation)

4. Remove the fasteners.






5. Pull the seal plate in the direction of the arrow shown in the figure, and then remove the tab.

6. Remove the seal plate.

7. Install in the reverse order of remove.

pro multis · About Operation CHARM